> For the complete documentation index, see [llms.txt](https://knowledge.out-smart.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://knowledge.out-smart.com/outsmart-knowledge-base/outsmart-knowledge-base-nl/backoffice/backoffice/materialen-en-materialen/materialen-toevoegen-aan-werkbonnen.md).

# Materialen toevoegen aan werkbonnen

Gebruik catalogusmaterialen op werkbonnen zodat beschrijvingen, prijzen en andere details sneller worden ingevuld.

Voeg Materialen toe aan een Werkbon wanneer u gebruikte materialen of producten wilt registreren.

Door Materialen uit de catalogus te gebruiken, blijft de Werkbon consistent en sneller in te vullen.

{% stepper %}
{% step %}

### Open de Werkbon

Ga naar **Werkbonnen**.

Open de Werkbon die u wilt bijwerken.
{% endstep %}

{% step %}

### Open de sectie Materialen.

Ga naar de sectie waar u materiaallijnen toevoegt.
{% endstep %}

{% step %}

### Zoek het Materiaal

Zoek op MateriaalCode, omschrijving, barcode of EANCode.

Selecteer daarna het juiste Materiaal.
{% endstep %}

{% step %}

### Controleer de regeldetails

Controleer de hoeveelheid, Prijs, Notitie en eventuele zichtbaarheids- of Facturatie-instellingen.
{% endstep %}

{% step %}

### Sla de Werkbon op

Sla de Werkbon op zodat de materiaallijn gekoppeld blijft aan de Opdracht.
{% endstep %}
{% endstepper %}

#### Herschik materiaallijnen op een Werkbon

U kunt de standaard Materialen die op een Werkbon worden getoond, op elk moment opnieuw ordenen. Daarmee wijzigt u de volgorde waarin de materiaallijnen op de Werkbon en in de PDF die de Klant ontvangt, verschijnen.

Gebruik de drie-lijns hendel (de sleepgreep) naast elke materiaallijn om standaard Materialen opnieuw te ordenen.

{% stepper %}
{% step %}
**Open de Werkbon**

Ga naar **Werkbonnen** en open de Werkbon met de Materialen die u opnieuw wilt ordenen.
{% endstep %}

{% step %}
**Zoek de drie-lijns hendel**

Naast elke materiaallijn ziet u een drie-lijns hendel (drie horizontale streepjes).
{% endstep %}

{% step %}
**Sleep een materiaallijn**

Houd de drie-lijns hendel naast de materiaallijn ingedrukt en sleep de regel vervolgens omhoog of omlaag naar de nieuwe positie.
{% endstep %}

{% step %}
**Laat de regel los op de gewenste plek.**

Laat de regel los op de plek waar u wilt dat deze komt. De standaard Materialen verschijnen nu in de nieuwe volgorde.
{% endstep %}

{% step %}
**Sla de Werkbon op**

Sla de Werkbon op zodat de nieuwe volgorde van Materialen behouden blijft.
{% endstep %}
{% endstepper %}

### Waarom dit helpt

* Materiaalgegevens worden automatisch ingevuld
* uw team overal dezelfde productgegevens gebruikt
* Werkbonnen blijven klaar voor opvolging en facturatie

{% hint style="info" %}
Als u ook **Stock**, selecteer het juiste Magazijn zodat de Wijzigingen in voorraad correct blijven.
{% endhint %}

### Veelgestelde vragen

<details>

<summary>Kan ik de hoeveelheid op de Werkbon nog aanpassen?</summary>

Ja.

U kunt de hoeveelheid per regel wijzigen.

</details>

<details>

<summary>Kan ik Materialen toevoegen die niet zichtbaar zijn op de PDF?</summary>

Ja.

Dat hangt af van de Instellingen van het Materiaal.

</details>

<details>

<summary>Kan ik Materialen ook in de app toevoegen?</summary>

Ja.

Dat hangt af van uw Permissies in de app en de inrichting.

</details>

<details>

<summary>Hoe wijzig ik de volgorde van Materialen die op een Werkbon worden getoond?</summary>

Houd de drie-lijns hendel naast een materiaallijn ingedrukt, sleep de materiaallijn naar een nieuwe positie en laat deze los. Daarmee worden de standaard Materialen die op de Werkbon worden getoond opnieuw geordend.

</details>

### Gerelateerde onderwerpen

* [**Werkbonnen**](https://knowledge.out-smart.com/outsmart-knowledge-base/outsmart-knowledge-base-nl/backoffice/backoffice/werkbonnen.md)
* [**Werkbon aanmaken**](https://knowledge.out-smart.com/outsmart-knowledge-base/outsmart-knowledge-base-nl/backoffice/backoffice/werkbonnen/werkbon-aanmaken.md)
* [**Stock**](https://knowledge.out-smart.com/outsmart-knowledge-base/outsmart-knowledge-base-nl/marktplaats-pakketten-en-power-ups/power-ups/voorraadbeheer.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://knowledge.out-smart.com/outsmart-knowledge-base/outsmart-knowledge-base-nl/backoffice/backoffice/materialen-en-materialen/materialen-toevoegen-aan-werkbonnen.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
